
如何才能避免涂布機極片經常性發生扯斷現象?
時間:2019-03-04 來源:http://leblanc.com.cn/ 發布人:昌盛機械
涂布機屬于流延膜生產線中的關鍵設備,負責對流延膜進行牽引、涂膠、壓花、收卷等工作。此應用系統各傳動機構均采用伺服,具有控制精度高,實時性強等特點,受到了大家的熱烈歡迎和一致的好評。有時候涂布機運行時會發生極片發生扯斷現象,這是什么原因造成的?我們該怎樣調整才可以避免?下面小編就給大家總結這種情況發生的主要原因吧。
Coating machine belongs to the key equipment in the production line of tape casting film. It is responsible for traction, gluing, embossing and winding of tape casting film. Servo is used in the transmission mechanism of the application system, which has the characteristics of high control accuracy and real-time, and is warmly welcomed and praised by all. Sometimes when the coating machine runs, the polar plate will be pulled off. What is the cause? How can we adjust to avoid it? The following edition will give you a summary of the main reasons for this situation.
1、取樣造成損傷,致使箔帶抗拉強度大幅下降;接
1. Sampling causes damage, resulting in a significant decrease in the tensile strength of the foil;
2、帶不正,附加拉力加大,使箔帶在薄弱處扯斷;
2. Incorrect belt, additional tension increases, so that the foil is broken at the weak point;
3、風量突變,分布嚴重不均;
3. The air volume changes abruptly and the distribution is seriously uneven.
4、溫度突變,對鋁箔強度產生較大影響;
4. The abrupt change of temperature has a great influence on the strength of aluminium foil.
5、張力偏大,不穩定,有突變現象;
5. Tension is too large, unstable and abrupt.
6、箔帶嚴重跑偏,被過輥端面邊緣割斷。
6. The foil belt is severely deviated and cut off by the edge of the end face of the roll.
基本上明白這些原因,然后我們一一進行調整,這類問題就可以迎刃而解了。
Basically understand these reasons, and then we can adjust one by one, and this kind of problem can be solved easily.
后小編想說一句,如果箔帶質量差,邊緣有缺口的話,也會造成極片扯斷的現象,大家在采購的時候也不能一味的貪圖便宜哦!
Finally, I want to say that if the quality of foil is poor and there is a gap in the edge, it will also cause a very fragmented phenomenon. We can not blindly seek cheap when purchasing.
今天的精彩內容就給大家介紹到這里了,本期的精彩內容由濟南昌盛雙組份打膠機提供,濟南昌盛主要提供各種打膠機和涂布機的研發銷售,歡迎大家前來選購,我們的官網是:http://leblanc.com.cn
Today's highlights are introduced here. The highlights of this issue are provided by Jinan Changsheng two-component gluing machine. Jinan Changsheng mainly provides research and development and sales of various gluing machines and coaters. Welcome to buy them. Our official website is http://leblanc.com.cn.
- 臥式丁基膠涂布機:選型需考量這些方面 2025/07/25
- 全自動封膠線使用注意事項:保障高效穩定運行的關鍵要點 2025/07/24
- 雙組份打膠機怎么用?使用方法解析 2025/07/23
- 全自動封膠線膠線的關鍵特性與應用要點 2025/07/22
- 中空玻璃加工設備的組成解析:從切割到密封 2025/07/21
- 全自動封膠線是什么的相關介紹 2025/07/18
- 中空玻璃加工設備主要類型及用途 2025/07/16
- 臥式丁基膠涂布機操作技術規范 2025/07/14
- 雙組份打膠機如何減少堵塞問題 2025/07/11
- 告別繁瑣涂膠,立式丁基膠涂布機讓效率與精度雙贏 2025/07/10